- Full start-to-end dual channel architecture – for the highest safety reliability
- Full start-to-end fault detection, cross checked – simplifying analysis
- Volt-free Interlock® Operators to enable X-Ray emission
- Interlocked mains supply –
- Interlocked low voltage supply 12/24VDC
- Built-in automatic warning sign control for mains or 24VDC illuminated signs
- Key-switch operation – to prevent unauthorised use
- System arm button – just press to arm
- Time limited, fail-safe, override option – to enable authorised personnel to enter or exit a room
- Emergency stop input
- Automatic door lock control
- Control system not software-based- indefinite maintainable service life
Interlock® Control for X-ray machines
Lasermet’s X-ray Interlock® controller is a high specification Interlock® control system that is ideal for use with X-RAY sets. It forms an essential part of the engineering controls required for restricting exposure to ionising radiation and conforms to the requirements of “Work with ionising radiation” Ionising Radiations Regulations 1999: Approved Code of Practice and guidance. Read more on how the ICS-6 meets the Regulations
Lasermet are world leaders in dedicated Interlock®家里没人半夜就和姐姐 system design, manufacture and installation. Lasermet also design and manufacture a large number of accessories including door contacts, access keypads, fingerprint access units, illuminated LED warning signs, recorded audible warning systems (audible alerts) and more.
Lasermet provides full system, design, supply and installation so customers can be sure the specification, selection and conformance requirements to achieve a bespoke, certified, safety control system. Lasermet supports its customers through distributors and sales offices around the world.
The ICS-6 is an expandable Radiation Interlock® Control System, designed and manufactured by Lasermet, which can achieve EN ISO 13849-1 performance level ‘e’ (Safety of machinery – Safety-related parts of control systems), when used with the appropriate equipment and wiring.
This compact, versatile unit can control interlocks, door locks, illuminated warning signs and other equipment. It can operate Interlock®家里没人半夜就和姐姐 switches with feedback monitoring and fault detection. It can be interfaced to Access Control and Fire Detection Systems and is fitted with an Override to allow controlled access through interlocked doors while also accepting emergency stop inputs.
The ICS-6 provides the highest levels of safety and functionality and has full start-to-end dual channel architecture and fault detection to meet the latest standards.
It has a simple, easy-to-use control panel which can be wired directly to 4 interlocks or groups of interlocks.
ICS-6 can be configured as a locking or non-locking Interlock® system featuring:
- Automatic fault detection and shutdown
- LED indication for the status of the following:
- Interlock® Switch
- Emergency Stop
- Safety Circuits OK
- System Overridden
- Safety Circuit Fault (Mismatch Fault)
- System Armed
- Dual-redundant fail-safe circuitry
- Single or Dual Channel Override control
- Feedback-based Sign Control – to maintain warning sign at Danger if the power or Interlock® control fails to go to the safe condition when the system is disarmed
Flexible Expandable System
Lasermet’s Interlock® controllers have earned a reputation as cost effective, reliable and highly flexible.
The standard ICS-6 can be expanded to have 9 Interlock® outputs by adding the IB9 Interlock® board. ICS-6 can be connected to other Lasermet Interlock®家里没人半夜就和姐姐 controllers to operate as a master or slave unit.
ISO 13849-1:2006 provides safety requirements and guidance on the principles for the design and integration of safety-related parts of control systems (SRP/CS), including the design of software. For these parts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safety functions. It applies to SRP/CS, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical, etc.), for all kinds of machinery. It does not specify the safety functions or performance levels that are to be used in a particular case.
ISO 13849-1:2006 provides specific requirements for SRP/CS using programmable electronic system(s).
Typical Interlock® configuration
|ICS-6||ICS-6 + IB9|
|ICS-6 + IB9 + Contactor Enhancement|
|3 x outputs|
(rated at 6A at 110/250 VAC / 50 VDC)Configure as desired e.g.1 off Interlocked mains output (6 A)1 off Interlocked output
(for up to 4 outputs)1 off Interlock® connector
|家里没人半夜就和姐姐8A at 110/250 VAC / 50 VDC)|
Configure as desired eg.
1 off Interlocked mains output (8 A)
1 off Interlocked shutter output
7 off Interlock® connector
|8 x outputs|
(rated at 8A at 110/250 VAC / 50 VDC)
4 x mains outputs
(rated at 32 A, 415 VAC)Configure as desired e.g.1 off Interlocked mains output
(32 A)1 off Interlocked 3-phase output
(32A)1 off Interlocked output
(for up to 30 outputs)7 off Interlock® connector operators
|Unlimited numbers can be connected. Monitoring available for 4 switches or groups of switches|
|110/230V or 24 VDC, 1A. Automatic switching of single or dual message signs|
|Emergency Stops||Unlimited numbers of emergency stops can be connected.|
Can be connected into Fire Alarm or Access Control system
|Supply:||110/230 V, 1A + connected load|
|Size||265w x 230h x 86deep (mm)||265w x 230h x 145deep (mm)||265w x 230h x 145deep (mm)|
|Weight||2 kg||2.2 kg||3 kg|
|Directives||Conforms to Machinery Directive, Low Voltage Directive, EMC Directive|
|Standards||Meets EN ISO 13849-1 PLe (Cat 4 safety system, Performance Level ‘e’), EN61508 (SIL 4), EN61010, EN60947-1|
Ordering information and quotations
To obtain a quote and to specify your order please contact the sales department at Lasermet on 01202-770740 or email firstname.lastname@example.org家里没人半夜就和姐姐 requesting a Required Information form. This is to specify the system required. Once this is completed we can provide a quotation.
If you would like to discuss the Interlock®家里没人半夜就和姐姐 system or have any related questions, we would be pleased to discuss this with you.